Most moms will agree pregnancy and labor can be a scary time and all you want is to deliver a healthy baby, kicking and screaming.
But one mom was faced with the unthinkable when her baby boy was born with medical issues that left him on a ventilator.
Lisa Hough shared an image of her sweet baby grandson born to her daughter Chelsea and also shared the unthinkable tough decision that her daughter had been faced with.
The mom of three and nana of two said her grandson Karson had been born with many medical complications.
“The only way to describe what has happened is that this beautiful baby boy has suffered two very rare traumatic conditions that are completely unrelated to one another,” Nana Lisa shared on her Facebook page.
She added her newborn baby grandson had suffered a “hemorrhage in the left temporal lobe” and had also been diagnosed with a rare, genetic, metabolic disorder called Non-ketotic hyperglycinemia (NKH).
“His case is presented as severe and would cause him to be severely neurologically impaired – functioning at a 2-3 month old level at best for his lifetime,” Lisa wrote.
His mom, given all the information from the medical staff around her, made the incredibly tough decision to take him off life support.
Lisa wrote of the heartbreaking moment they had to say goodbye to their sweet little one.
“While we weren’t ready to say goodbye to Karson, we had come to terms with the inevitable. We were given 10 minutes after withdrawing intensive care and the ventilator and told he would not breath on his own and to expect his heart to stop within those 10 minutes.
But, according to Lisa, it seemed “God had other plans” and said she and her daughter witnessed a miracle.
“He immediately started breathing on his own once the ventilator was removed, heart rate and oxygen stabilized, and here we are 5 hours later with this miracle baby that we were told would never breath, swallow, have gag reflexes, or even survive. He is breathing unassisted.
“He is swallowing. He is surviving. He even has slightly opened his eyes a couple times today.”
She said his doctors had no explanation for what happened saying no medical or science data supports this little fighter surviving; the only explanation they have is that it’s a miracle.
“I’m not sure why I ever thought we were so underserving of a miracle…and I’m not sure how long we have with him, but we have him now. And now we will take,” Lisa wrote.
Finally, on March 1, she and her family were given the joyous news that their tiny bundle of joy would be coming home that week.
“Every day, I am brought to my knees, and just when I think God is done, I am quickly reminded that he isn’t….I have no words for my gratitude and I will praise Him for as long as I have air in my lungs for giving Karson his,” Lisa wrote.
From her very first post, commenters were fully supportive of the journey, celebrating the survival of Karson with more than 30,000 reactions to the post announcing the wonderful news that Karson survived and is thriving
13 Simple Tips of How to Spot Poor Quality Shoes Right On
Ideally, a new pair of shoes should be comfortable and fashionable. However, you may find a lot of options in footwear shops that meet these 2 criteria, but at the same time their quality is so bad that they won’t last long. We decided to find out what things you should pay attention to in order to choose a really high-quality pair.
Check the shoes for smudges and glue marks.
Manufacturers often use glue to stick together different parts of the shoe. If the glue is of high quality and the work is done properly, the pair will last a long time. However, small glue drips in the spots where parts meet or traces of glue on the surface indicate that you are looking at low-quality shoes and that there were issues during production.
When a part of the shoe, its sole or insole, comes off a bit, it means the shoemaker probably used bad or expired glue, and this pair will fall apart quickly.
Examine whether the pair is symmetrical.
Quality shoes in a pair should be symmetrical, and any differences between the right and left shoes most likely indicate a defect. To check this, you need to put the soles of both shoes together and see if they match in length and width.
It’s also worth putting the pair on the floor to understand whether the height and outline of the upper edge of the heel are symmetrical. If the soles are painted in different colors, check whether the paint is within the borders of the sole and whether the pattern matches. Gross irregularities in symmetry indicate that the manufacturer didn’t pay much attention to quality.
Check the seams carefully.
Any uneven or diverging seams make shoes look not that good. This happens if the manufacturer used too thin threads or the work was done poorly. As a result, such a pair will fall apart much faster. It’s also necessary to check the uniformity of stitches and the evenness of the seam itself.
If its line is curved or zigzag-looking, this means that the shoes you’re looking at are of poor quality and will lose their appearance in a couple of months. And zigzag-looking stitch is often used to hide the imperfections of the stitching.
Examine the heels.
The heel must be firmly attached to the sole and not wobble. It’s necessary to look at the shoes from the side. In good quality pumps, the high heels are positioned exactly under the center of the heel and touch the ground at a slight incline.
It’s worth looking carefully at the heels from behind – any deviation of the heels from the angle of 90⁰ indicates a defective product. Moreover, these shoes are simply dangerous to wear – this may lead to ankle injuries.
Loose eyelets are a bad sign.
Any metal or plastic parts on the shoe (especially those that come into contact with the skin) should be tightly fastened. Thus, it’s worth carefully examining the eyelets for laces. Although this defect is quite rare, it can lead to wearer’s injury.
You should also check how well any embellishments are attached to the shoe. If they fall off at one point, the pair won’t look good anymore.
Carefully inspect the inside of the shoe.
Some manufacturers save on the training of workers and don’t calibrate equipment before the production of a new product line. As a result, shoes, boots and sneakers may have seemingly insignificant defects such as wrinkles and creases. If these defects are small, they won’t cause much trouble to the wearer. But large creases can rub the skin while walking, which will lead to abrasions and blisters on the feet.
Examine the insoles.
Even if a shoe looks perfect from the outside, you need to scrutinize it from the inside too. If the insoles show small wrinkles and creases, this pair is likely to be uncomfortable to wear. In addition, you should carefully feel the insoles to make sure that there are no bubbles on them.
Another important thing is that there must be cushioning between the insole and the sole, especially in the toe and heel area. Otherwise, a long walk in these shoes will make not only your feet and legs sore, but also your back.
Check how the shoes smell.
Low-quality and cheap shoes often have a strong chemical odor. It’s best to refrain from buying this pair. But if shoes or boots exude the scent of leather, polish or wood, you’ve found the shoes of high quality.
Take a photo of the shoes.
Of course, shoes made of synthetic materials can also be of high quality, especially when it comes to sports models. But good shoes should ideally be made of leather. They are softer and fit better on the foot, which means they will be much more comfortable to wear.
However, the quality of leather also varies. Often, manufacturers don’t mention the type of leather they use to make shoes in order to keep costs down. To determine the quality of the product you are holding in your hands, you need to take a photo of the shoes and enlarge the image. If you can see pores on the leather, you can safely buy the shoes.
Bend the shoe a little bit.
You don’t need to knead your shoes too much, but you can bend the shoe slightly to see how flexible the sole is and whether it remains attached to the upper part when moved. In addition, it’s worth pressing the sides of the shoe a little bit. Throughout the day, our feet usually increase in size a little, so a quality pair should adapt to these changes.
Check how your shoes sound.
Most shoe shops have soft carpeting on the floor, so it’s a good idea to take a short walk on a harder surface before making a purchase. If the soles and heels make unpleasant clanking noises when you walk, you are likely to be wearing a low-quality pair. And platform or wedge shoes shouldn’t sound like there are voids inside the sole.
Examine the material of the sole and heel carefully.
Usually the sole of a really good quality pair is made of leather or good rubber. These shoes are comfortable to wear, and in addition, they almost don’t slip. At the same time, if the base of the sole is uneven, then these shoes will be uncomfortable.
In addition, it’s worth examining the material from which the heels are made. If the manufacturer used plastic or didn’t cover the heel with leather or fabric, then you are looking at a cheap product that is far from being perfect.
Rub the shoes with a cloth.
Sometimes manufacturers use poor quality leather dyes, which can leave marks on the skin or clothes. Therefore, before buying, you should carefully rub the shoes inside and outside, first with a dry cloth and then with a damp cloth. If there are no marks on the fabric, the shoes are okay.
And here’s a list of fashionable shoes that are not as cool as they look.
Leave a Reply